Roper Dishwasher Not Draining: Reasons And How To Fix?

Dishwasher drain problems are quite common, considering the volume of water involved. If your Roper dishwasher isn’t draining properly, it might be because food particles or other debris have clogged up the drainage system, or there could be any other problem. All of those reasons and their solutions are discussed below. So let’s get started.

1. Check for a clogged filter

The first thing you should check is for any blockage in the filters. The filter is usually located at the bottom of the dishwasher, and there might be food particles or other debris blocking it. Use a piece of wire to unblock it, if necessary. If it doesn’t help, replace the filter with a new one.

You need to check whether the drain hose is installed correctly to fix this issue. Fix any potential leaks or clogs as well.

2. Clean the drain pump

The second thing you should check is the drain pump. The pump is the device that pumps out all of the water inside your dishwasher to a drainage system or directly outside the house through an external hose. Your dishwasher won’t drain properly if it doesn’t work, so cleaning it might help. Open the dishwasher and check whether any food particles are stuck inside the drain pump. If yes, use a can of compressed air to remove them.

3. Check for drainage problems

Another reason why your Roper dishwasher might not be draining properly is that there is a clog in the drainage system outside or inside your house. If you find any clogs, remove them by hand or use a wire to clean the drainage pipes.

If you are not able to handle all these issues, then call Advance Appliance repair as they are certified in appliance repairing and can repair all brands’ appliances.

4. Drain water manually

Finally, if the problem still isn’t fixed after following all of these tips, you should open your dishwasher door and manually remove all of the water from inside it. Sometimes some food particles might get trapped inside the dishwasher door, due to which your dishwasher won’t drain properly. So, check for any water left in the base of your dishwasher and remove it manually.

After following all of these steps, call a local appliance repair service if you still have an issue with the dishwasher draining water. The technician will be able to identify the problem and fix the issue. 

When to Replace Your Dishwasher?

Every time you use a dishwasher, it accumulates a certain amount of mineral deposits, affecting the performance and lifespan of your appliance. Thus, if you have used your Roper dishwasher for more than 8 or 10 years, then its internal components start wearing out as well as losing their functionalities. It is recommended to replace an old dishwasher with a new one in that case.

Conclusion

Dishwasher drain problems are quite common, considering the volume of water involved. If your Roper dishwasher isn’t draining properly, it might be because food particles or other debris have clogged up the drainage system, or there could be any other problem. All of those reasons and their solutions are discussed above, and still, it doesn’t help then look for Appliance repair Edmonton if you are living there or nearby area; if not, then look for online help. I hope this article was helpful to you; if yes, then make sure to share it on social media.

Scroll to Top Appliance Repair Edmonton, CA