Why Does My Roper Washer Shake And How To Fix?

Since their first release, Roper washing machines have been one of the best washers. With a wide range of options and a long list of features, the Roper washing machine has provided consumers with the best unit for their clothes.

However, if you have experienced your Roper washer shaking violently while it is running, don’t worry because you are not the only one. In fact, many Roper washing machine owners have had this issue at some point, and there is a solution for it.

In this article, we will cover all the possible reasons why your Roper washer shakes violently and provide you with tips on how to fix it.

1. The Rope in your Roper washer is not properly adjusted

If the load is unbalanced and the rope becomes loose, the tub of the machine will shake violently as it moves around. As a result, this can cause severe damage to both your clothes and your washer.

Make sure that you tighten up your rope before running the machine to fix this issue. If you are experiencing this issue often, it might be time to replace your rope.

2. Your Roper is unleveled

If your washing machine is not leveled properly, there is a high chance that the unit will shake when in use due to its uneven feet. The best way to resolve this issue is to place some weight on the opposite side of your machine. This will help level it out so that there are no bumps or depressions in order for you to avoid any uneven movement.

3. You have too many clothes in your Roper washer

When you have an overstuffed washing machine, the tumbling motion of the machine becomes impossible, which causes it to shake violently.

To fix this problem, make sure that you don’t overload your clothes in order for the tub to rotate properly and avoid any damage.

4. Your Roper washer is vibrating too much on the spin cycle

If your Roper washer shakes excessively during the spin cycle, this can be caused by your machine sitting on an uneven surface, worn-out rollers, or damaged feet.

To solve this problem, you will need to level the floor where your washer is sitting or replace its wheels if there are any worn-out parts. 

5. The drive belt of your Roper washer has snapped

The drive belt is an important part of the machine that drives the tub. If this belt breaks, it can also cause your Roper washer to shake violently because there will be no way for it to rotate the drum.

To fix this problem, you will need to purchase a new drive belt and replace it as soon as possible if you don’t want to end up with a broken washer.

To replace the belt, it is best to call Advance Appliance Ltd as they are experienced in appliance repair and can solve many problems with your washer.

6. Your Roper washing machine has an electrical problem

If you notice that your Roper washing machine shakes and vibrates, but there is nothing in the drum, this could be because the motor has gone bad and isn’t able to function properly anymore. 

To fix this problem, you will need to replace the motor that is attached to your washer. This will be a rather difficult process that requires an experienced hand.


As you can see, there is a wide range of reasons why your Roper washing machine may be shaking and vibrating. If you want to avoid having this issue in the future, make sure that you clean out your washer after each load and keep it level at all times.

If none of these solutions work for you, then it might be time to call a professional appliance repair Edmonton if you are living there, who can come and take a look at your unit.

Service We Offer Repair & Installation
Scroll to Top